| A channel feature is formed in this frame’s face
to accommodate installation of a photoluminescent tape.
Standard Features included in Option and
Price Add:
- channel feature integrally formed in frame face
Product Offering:
- Ceco: SQ/SU, BQ/BU, SR, SQW/SUW, SRW, DQ/DU, DR, DQW/DUW,
DRW profiles with channel in one face
- Curries: M, CM, G, WM, WG, DEM, C, CG, WC, WCG, DEC profiles
with channel in one face
- Fleming: F, DW, DE profiles with channel in one face
- Hemmed channel feature
- Welded anchors (no slip in or comp anchors)
- No 4" heads.
- SMW only. Welding available at factory and service centers.
- Singles or pairs only (removable & fixed mullion
included)
- No transom or sidelite frames (mullion evaluation in process)
- 14 and 16 gauge
- 2-13/16” minimum face for channel feature (jamb
& head face dimensions are equal). 1-3/4” minimum
opposite face.
- Unequal F1 and F2 available
- No stainless steel
- No bottom pivots
Optional Accessories:
Suggested Architectural Specification
– Option LG5
(Include paragraph in 08110 under "Part 2 - Products") 2.05
Photoluminescent Egress Frame Assemblies
A. Egress Openings - Where indicated on
the Door Schedule, frames used in locations of egress shall
utilize a LiteGuide™ photoluminescent marking system.
Reference jamb and head details for profiles required.
- Frame profile must have a shadow-box frame design for
installation of rigid photoluminescent marking material.
- Photoluminescent materials used for all products specified
herein shall be a luminous yellow strontium aluminate
based material. The use of radioactive materials or zinc
sulfide materials is prohibited.
- Photoluminescent materials are to be supplied for field
installation after finish painting, with supplied adhesive
backing. Materials shall extend the entire perimeter of
the frame face and be sized to fit frame reveal.
- A minimum of 5 foot-candle external unfiltered fluorescent
illumination must be present on the face of the photoluminescent
material at all times of building occupancy.
|
