| This frame has a channel feature formed in the face to accommodate
installation of a clear PVC extrusion with the FLATLITE®
lamp, a registered trademark of E-Lite Technologies, Inc., US
Patent 5,047,755. The FLATLITE lamp in this assembly can be
powered by connection at the base of each jamb with the E-Lume-A-Path™
egress marking product or powered by the building power supply
in a stand-alone application. This frame is also used when controlling
(e.g., power, dimming, etc.) LiteGuide™ door hardware
with the E-Lume-A-Path system. The appropriate electrolynx option
may be selected if electric hardware (including LiteGuide exit
sign and/or hardware, electric hardware and/or trim, etc.) is
specified in the door.
Standard Features included in Option and
Price Add:
- Knockouts @ 4" & 6" in returns
- Full jamb depth junction box at base of both jambs with
1-1/4” diameter access knockouts @ 5” AFF in
frame jamb soffits
- Full jamb depth junction box at head with 1” diameter
access knockout in rabbet
- Conduit and two conductor 22 gauge wire harness between
head and lock jamb junction boxes with 4 pin quick connect
connector at lock jamb junction box
Product Offering:
- Ceco: SQ/SU, BQ/BU, SR, SQW/SUW, SRW, DQ/DU, DR, DQW/DUW,
DRW profiles with channel in one face
- Curries: M, CM, G, WM, WG, DEM, C, CG, WC, WCG, DEC profiles
with channel in one face
- Fleming: F, DW, DE profiles with channel in one face
- Hemmed channel feature
- Welded anchors (no slip in or comp anchors)
- No 4" heads
- SMW only. Welding available at factory and service centers.
- Singles or pairs only (removable & fixed mullion
included)
- 14 and 16 gauge
- 2-13/16" minimum face for channel feature (jamb
& head face dimensions are equal). 1-3/4" minimum
opposite face.
- Unequal F1 and F2 available
- No stainless steel
- No bottom pivots
Optional Accessories:
- FlatLite Kit (FLATLITE® lamp, power supply, connector
system, clear PVC raceway packaged for up to 4080 and 8080
openings, raceway ends and fasteners, two 1-1/4” hole
plugs and one 1” hole plug) for connection to 24 Volt
building power supply without E-Lume-A-Path™.
Components and Who Supplies:
- Egress frame assembly: Hollow Metal Distributor
- Flatlight Lamp Kit: Hollow Metal Distributor
- 24 Volt DC, 2 Amp Regulated Power Supply for frame light
kits not powered by E-Lume-A-Path™: Hardware Distributor
Who Installs:
- Contractor installs frame.
- FlatLite Kit installed by exit lighting contractor. Connection
to E-Lume-A-Path™ egress marking product by exit lighting
contractor.
- If frame to be used as start of E-Lume-A-Path™
system, exit lighting contractor should supply two conductor
18 gauge wire from E-Lume-A-Path™ power supply to
jamb junction box.
- Exit lighting contractor may run FlatLite from E-Lume-A-Path™
so kit not required
- Contractor will install the Flatlight Lamp Kit if the
opening is not a continuation of the E-Lume-A-Path™
system. Certified electrician is required to connect the
building wiring to the harness termination in the frame
head junction box.
Suggested Architectural Specification
– Option LG4
(Include paragraph in 08110 under "Part 2 - Products")
2.04 Junction Egress Frame Assemblies
A. Where indicated on the door schedule,
provide hollow metal frames with a channel feature in the
frame face to accommodate installation of a clear channel
fixture with the FLATLITE® lamp. These frames shall
include:
- Knockouts at four inches and six inches in frame returns.
- Full jamb depth junction box at base of both jambs
with 1-1/4 inch access knockouts at five inches AFF in
frame jamb soffits.
- Full jamb depth junction box at head with one inch
diameter access knockout in frame rabbet.
- Conduit and a two conductor 22 gauge wire harness between
the head and lock jamb junction boxes, with a four pin
quick connect connector at the lock jamb junction box.
- Wire rated at 300 VAC minimum.
B. Connect to E-Lume-A-Path™ egress
marking product with wire nuts.
C. Provide FlatLite kit for connection to
E-Lume-A-Path™ egress marking product. Each kit shall
consist of a FLATLITE® lamp, power supply, connector system,
clear PVC extrusion, raceway ends and fasteners, two 1-1/4
inch hole plugs and one 1” hole plug. (Note to specifier:
Delete paragraph C if exit lighting contractor is running
FlatLite from E-Lume-A-Path.)
|
