| A channel feature is formed in this frame’s face
to accommodate installation of a clear PVC extrusion with
the FLATLITE® lamp, a registered trademark of E-Lite Technologies,
Inc., US Patent 5,047,755. The FLATLITE lamp in this assembly
is powered by connection at the base of each jamb with E-Lume-A-Path™
egress marking product. The appropriate ElectroLynx option
may be selected if electric hardware (including LiteGuide™
exit sign and/or hardware, electric hardware and/or trim,
etc.) is specified in the door.
Standard Features included in Option and
Price Add:
- Knockouts @ 4” & 6” in returns
- Full jamb depth junction box at base of both jambs, 1-1/4”
diameter access knockouts @ 5” AFF in frame jamb soffits
Product Offering:
- Ceco: SQ/SU, BQ/BU, SR, SQW/SUW, SRW, DQ/DU, DR, DQW/DUW,
DRW profiles with channel in one face
- Curries: M, CM, G, WM, WG, DEM, C, CG, WC, WCG, DEC profiles
with channel in one face
- Fleming: F, DW, DE profiles with channel in one face
DW, DE profiles
- Hemmed channel feature
- Welded anchors (no slip in or comp anchors)
- No 4” heads
- SMW only. Welding available at factory and service centers.
- Singles or pairs only (removable & fixed mullion included)
- 14 and 16 gauge
- 2-13/16” minimum face for channel feature (jamb
& head face dimensions are equal). 1-3/4” minimum
opposite face.
- Unequal F1 and F2 available
- No stainless steel
- No bottom pivots
Optional Accessories:
- FlatLite Kit (FLATLITE® lamp, power supply, connector
system, clear PVC extrusion packaged for up to 4080 and
8080 openings, raceway ends and fasteners, two 1-1/4”
hole plugs, and one 1” hole plug) for connection to
E-Lume-A-Path™ and powered by E-Lume-A-Path™.
Components and Who Supplies:
- Egress frame assembly: Hollow Metal Distributor
- FlatLite Lamp Kit: Hollow Metal Distributor
Who Installs:
- Contractor installs frame.
- FlatLite Kit installed by exit lighting contractor. Connection
to E-Lume-A-Path™ egress marking product by exit lighting
contractor.
- Exit lighting contractor may run FlatLite from E-Lume-A-Path™
so light kit not required.
Suggested Architectural Specification
- Option LG3
(Include paragraph in 08110 under "Part 2 - Products")
2.04 Egress Frame Assemblies
A. Where indicated on the door schedule,
provide hollow metal frames with a channel feature in the
frame face to accommodate installation of a clear PVC extrusion
with the FLATLITE® lamp. These frames shall include:
- Knockouts at four inches and six inches in frame returns.
- Full jamb depth junction box at base of both jambs with
1-1/4 inch access knockouts at five inches AFF in frame
jamb soffits.
B. Provide FlatLite kit for connection to
E-Lume-A-Path™ egress marking product. Each kit shall
consist of a FLATLITE® lamp, power supply, connector system,
clear PVC extrusion, raceway ends and fasteners, two 1-1/4
inch hole plugs, and one 1” hole plug. (Note to
specifier: Delete paragraph B if exit lighting contractor
is running FlatLite from E-Lume-A-Path.)
|
