This frame has a 2 conductor jacketed wire harness encased by a continuous steel cover in the return of the frame around the frame perimeter. This allows the E-Lume-A-Path™ egress marking product to be connected through the frame system to continue the egress path lighting from the opposite door jamb without illuminating the frame perimeter. The frame has conduit between a head junction box and lock jamb base junction box with a 2 conductor jacketed wire harness to allow control (e.g., power, dimming, etc.) of door LiteGuide™ hardware via connection to E-Lume-A-Path™ system. The appropriate ElectroLynx™ option may be selected if electric hardware (including LiteGuide exit sign and/or hardware, electric hardware and/or trim, etc.) is specified in the door.

Standard Features included in Option and Price Add:

• Knockouts @ 4" & 6" "in returns
• Full jamb depth junction box at base of both jambs with 1-1/4” diameter access knockouts @ 5” AFF in frame jamb soffits
• Full jamb depth junction box at head with 1” diameter access knockout in rabbet
• Conduit and two conductor 22 gauge wire harness between head and lock jamb junction boxes with 4 pin quick connect connector at lock jamb junction box
• 2 conductor 18 gauge jacketed wire harness in opposite door rabbet return, around frame perimeter. Wire rated at 300 VAC minimum. No connectors – connect to E-Lume-A-Path™ egress marking product with wire nuts.

Product Offering:

• Ceco: SQ/SU, BQ/BU, SR, SQW/SUW, SRW profiles - one return will have backbend
  DQ/DU, DR, DQW/DUW, DRW profiles
• Curries: M, CM, G, WM, WG profiles – one return will have backbend
  C, CG, WC, WCG profiles
• Fleming: F profile – one return will have backbend
  DW, DE profiles
• Welded anchors (no slip in or compression anchors)
• No 4" heads.
• SMW only. Welding available at factory and service centers.
• Singles, Pairs, 4 pan and 3pan Transom Frames, Sidelite Frames
• No half sidelight frames
• 14 and 16 gauge
• No stainless steel
• No bottom pivots

Components and Who Supplies:

• Bypass frame assembly: Hollow Metal Distributor

Who Installs:

• Contractor installs frame. Connection to E-Lume-A-Path™ by exit lighting contractor.
• If frame to be used as start of E-Lume-A-Path™ system, exit lighting contractor should supply two conductor 18 gauge wire from E-Lume-A-Path™ Power Supply to lock jamb junction box.

2.04 Junction Bypass Frame Assemblies

A. Where indicated on the door schedule, provide hollow metal frames with a bypass option for the E-Lume-A-Path™ egress marking product. This option shall include:

1. Knockouts at four inches and six inches in frame returns.
2. Full jamb depth junction box at base of both jambs with 1-1/4 inch access knockouts at five inches AFF in frame jamb soffits.
3. Full jamb depth junction box at head with one inch diameter access knockout in frame rabbet.
4. Conduit and a two conductor 22 gauge wire harness between the head and lock jamb junction boxes, with a four pin quick connect connector at the lock jamb junction box.
5. A 2 conductor 18 gauge jacketed wire harness encased in a continuous steel cover in opposite door rabbet return, around frame perimeter.
6. Wire rated at 300 VAC minimum.

B. Connect to E-Lume-A-Path™ egress marking product with wire nuts.

Electroluminescent frames and exit signs on doors are patent pending innovations from ASSA ABLOY Group companies